top of page
Featured Posts
Pile Group Tutorial – Example 2: Pile Group in Sand with Pinned Pile Cap Connection
In this tutorial example, the use of the PileGroup program is demonstrated for analysing a pile group in sand. This example involves a 4 x 4 pile group consisting of 16 numbers of 760 mm diameter driven prestressed concrete piles of 16.5 m long, which were spaced at three pile diameters in both directions.
Mar 28
Bored pile socketed into interbedded clay and sand layers in Singapore
This blog presents a design example for a 1.2 m diameter reinforced concrete bored pile installed through interbedded clay and sand layers
May 1, 2023
EURIPIDES steel pipe test pile driven into fine to medium sands
This blog presents a case study for an example from "ICP Design Methods for Driven Piles in Sands and Clays” by Jardine et al. (2005)
Feb 6, 2023
P-y curves of weak carbonate rock - Abbs (1983)
P-y curve model for weak carbonate rock proposed by Abbs (1983)
Aug 29, 2021
P-y curve model of liquefied sand - Rollins et al. (2005)
PileLAT program adopts the p-y curve model of liquefied sand recommended in Rollins (2005) based on the full-scale lateral load tests.
Aug 24, 2021
bottom of page