LCPC CPT method for pile axial capacity in ALLCPT program
ALLCPT program provides a pile capacity analysis tool which can be used to calculate pile axial capacity for various pile types based on the
PileGroup Version 2.3 Release
We are pleased to announce that PileGroup Version 2.3 is released in September 2021 with the following improvements and updates compared to
Circular pile group layout for wind turbine foundations in PileGroup program
Circular pile group layout can be generated easily for wind turbine foundations in the PileGroup program. A pile length and layout wizard...
P-y curves of weak carbonate rock - Abbs (1984)
P-y curve model for weak carbonate rock proposed by Abbs (1983)
P-y curve model of liquefied sand - Rollins et al. (2005)
PileLAT program adopts the p-y curve model of liquefied sand recommended in Rollins (2005) based on the full-scale lateral load tests.
Start a new analysis for laterally loaded single pile using the PileLAT program
This blog explains how to start a new analysis for laterally loaded single piles using the PileLAT program. Step by step, it demonstrates...
Import a CPT raw data file into ALLCPT program
This blog explains how to import the CPT raw data into ALLCPT program as per the following simple steps. Step 1: Select File >> Import...
Settlement analysis under axial load for single piles
Settlement prediction of single piles under axial loading is as important as the estimation of ultimate axial capacity which is the sum of u
Advantages of "consistent" approach over lumped methods for laterally loaded piles
It is common to analyze laterally loaded piles by treating the problem as a beam on an elastic foundation. In general, the finite element me
P-Delta effects of laterally loaded piles under axial loading
Laterally loaded piles under axial loading with considering P-Delta effect. The lateral displacement of pile foundation often shall be check
