top of page
PileAXL.png

PileAXL Standalone

The latest version of PileAXL is Version 2.3 which has been released in February 2019 and can be downloaded from the links below. 

Standalone License

For the program with the standalone license, a license file will need to be generated to activate the program. The installation and activation procedures are as below:

Step 1: Unzip and run the program setup file (PileAXLSetUpStandalone.zip) to install the program.

Step 2: Forward us the hardware ID after you install the program (copy and paste the hardware ID as text in the reply email to Support@PileGroups.com) and we will then send you the license file for activation. The hardware ID can be found from “About” Dialog under the “Help” Menu of the program once it is installed - refer to the figure below.

PileAXL Hardware ID.png

Step 3: Once you receive the license file from us, you can save it onto your desktop first and then copy it to the installation folder of the program. The program should be activated once you restart it.

Note that if you already activated the program before and only will install the latest program update, Step 2 and Step 3 are not required as the program was already activated on the same computer. 

Single Piles and Pile Groups under General Loading
bottom of page